NEW WHEELS! - My Electric Hummer Has Liquids inside?

görünümler 1 796 800
100% 77 000 0

We got new tires for the Electric Humvee! HUGE thanks to Trail Built Off-road for hooking us up: team.trailbuiltoffroad.com/jer... See what new wheels and tires fit your machine. Today as we near completion of our Military HMMWV turned electric, we get some new tires, add gear oil to the hubs, as well as get the Transfercase and Torquebox buttoned up and ready to roll. Cuz rolling will come soon.

Watch all the EV Humvee build videos in order HERE: trvid.com/group/PL0...

Get my Shirts and Razor Knife here! www.jerryrigknife.com/

Anker is named as the Official Charging Partner of JerryRigEverything: ankerfast.club/JREpartnership

*Follow me for updates!*
Instagram: instagram.com/zacksjerryrig
Facebook: on.fb.me/1U4bQqv
Twitter: twitter.com/ZacksJerryRig

LARGE tool kit: amzn.to/2DURcr7
Travel Tool Kit: amzn.to/30LKXOY
Mega Tool Kit: amzn.to/2OwequL
Plastic Pry tools: amzn.to/1Tu57pI
Metal phone opening tool: amzn.to/1WdOFv0
Replacement phone parts: www.fixez.com/?Jer...

The camera I used to film this video: amzn.to/2p7GtkX
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: click.dji.com/AI2tmSb0onM9XPV...

TO SEND ME STUFF: See my P.O. Box on my 'About page': trvid.com/u-JerryRig...

JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

Nasıl Yapılır ve Stil



13 Oca 2022




Yük bağlantısı.....


Çalma listem
Daha sonra izle
gautam goel
gautam goel 4 aylar önce
I would love to watch a breakdown of how much the entire project cost Zack. If he is comfortable with sharing that information.
Outlaw84 14 gün önce
I think maybe right under 100k
Remmik 22 gün önce
@Lorin K Help you understand the revenue from his TRvid videos?? There is this new service where you can go and search for anything. You will find that someone has posted a video on how to do or understand almost anything. It’s called You Tube, I think.
Alexander Greenfield
I have an idea for releasing the build price.......quietly mention it's actually twice what you'll be stating in the next video. Then when the missus does check the "how much did this cost me vid" she'll think it was quite reasonable. We'll all know the truth. 😂
JG Aylar önce
Probably 500k
Dustin Miller
Dustin Miller 2 aylar önce
I'd love to know myself since I'm wanting to do an electric schoolie conversion
392HEMI32 3 aylar önce
Zach, I count six different kinds of liquids (not four): 1) brake fluid 2) power steering fluid (VAVOLINE) 3) wheel hub oil (MASTER PRO) 4) transfer case gear oil (RED LINE) 5) EV torque box gear oil (ROYAL PURPLE) 6) battery coolant … seven if you are going to run a windshield washer pump/tank
redcatxb125 11 saatler önce
Seven, forgot the front and rear differentials
AceGaming_ 321
AceGaming_ 321 Aylar önce
"out with the old, in with the new" - chrisfix
Modeus 2 aylar önce
@392HEMI32 what about blinker fluid
392HEMI32 2 aylar önce
@Modeus yes … as I mentioned in my comment, wiper fluid would be #7
Modeus 2 aylar önce
Don't forget the wiper fluid
GrantScottProductions 4 aylar önce
Honestly Jerry, whenever I get that notification about a new video, I drop and run to my PC to watch in 4K, all the lights off and make sure there is no one disturbing me. I LOVE these videos and I cannot wait for the end but also hope these type of videos never end.
Floki 4 aylar önce
The epitome of having too much time.
Waldog TV
Waldog TV 3 aylar önce
I think the wheel tire combo looks fine. Matches the theme, and will be good even if you repaint it. I can't wait to see the first test drive of this build!
KingJarreth 3 aylar önce
I'm a volunteer first responder, I love what you're doing to the HMMWV, I gotta ask - Will you be labeling this as an EV so any emergency responders know to watch for high voltage hazards? I have faith in you, I have faith in the structural integrity of the HMMWV, but people will prove the necessity of the consideration.
ThreeTwentyTech 4 aylar önce
This series is seriously addicting
Paul Jefferies
Paul Jefferies 4 aylar önce
Yeah too fun!
gikash 4 aylar önce
@ThreeTwentyTech yes I've been watching it from day one
ThreeTwentyTech 4 aylar önce
@gikash have you watched the entire thing?
gikash 4 aylar önce
wordreet 4 aylar önce
A serious series yes siree Siri!
Scurry 4 aylar önce
Check the date of manufacturing on those tires, might be good to keep for spares. Low chance they're still the originals from all that time ago. Also cracking on the sidewall is more dangerous than cracking on the tread, especially with tires that durable I wouldn't worry too much about the cracks you show. Just make sure the side of them aren't cracking, that's how you get blowouts like Westin 😁
Munro Live
Munro Live 3 aylar önce
Such a fun project and a great series. Well done Zack.
Jonathan Silva
Jonathan Silva 3 aylar önce
At 08:53, you're almost in the best position to mount that tire! Scoot a little closer, straighten out the right leg and once the holes are in line with the lug nuts, squeeze them thighs to raise the tire up to height before sliding it into place. Love the conversion so far man!
Mike Gizzi
Mike Gizzi 2 aylar önce
Love this project! Just tuned in to this build, one quick suggestion is to elevate your vent/s off the t/case, torque box, and diffs or anything that's vented to keep unwanted liquids/H2O out of the gears or internal components when running through creeks/flooding/big ass puddles, etc!! I cant wait to see this badass rig on the road, 2 thumbs up on this project!!!!
ElectroBOOM 4 aylar önce
"the goal is not to end up on a fail video"... I didn't get that memo!!
Clyde Alcott
Clyde Alcott 4 aylar önce
There you are Sir Happy birthday
Khant Chaudhari
Khant Chaudhari 4 aylar önce
🤣 btw I love your videos. And personally when you get shocked. 😂
Alaric Hanson
Alaric Hanson 4 aylar önce
I've only watched about 4 hours worth of fail videos of a certain youtuber who plays with electricity. 😉
Ben C
Ben C 4 aylar önce
Lmao agreed
Con Diamantis
Con Diamantis 4 aylar önce
lol do NOT let this man anywhere near this car :)
bcvbb hyui
bcvbb hyui 4 aylar önce
Very cool as usual Zach!! So awesome to see the progress. Getting so close now? Re fluids, what about differential fluid and brake fluid? Those count!
Ankit Pathak
Ankit Pathak 4 aylar önce
This series is an inspiration for everyone out there wanting their own custom sets of wheels
PJ Conway
PJ Conway Aylar önce
Hi, Love how the build is going, wheels look amazing, would love bead lock bolts on the rims to look like original TOUGHNESS. But cool none the less! Super excited to see the finish. Well done! Wish we could buy cheap Humvees in Australia, second hand they are well over $100K !
Little Jackalo
Little Jackalo 26 gün önce
I'm sure the ones you're talking about are civilian H1 Hummer, not a military Humvee/HMMWV. They're pretty much the same, except the H1 has a lot more creature comforts. These decommissioned Humvees are only $5k-10k.
Dario 3 aylar önce
I love the project and how it is executed! Have you checked the wheel bearings if they are still good? That could improve the milage.
WHAT'S INSIDE? FAMILY 4 aylar önce
Putting that intro of garage opening on repeat 😍
Restore Broken Phone
Restore Broken Phone 4 aylar önce
Hello friend
AemVR 4 aylar önce
Nil I have lost all respect for what’s inside
Amoghvarsh Hattigoudar
@yass123 it's named "what inside bullet proof tesla tires"
Anirban Dey
Anirban Dey 4 aylar önce
You made me watch the intro again.. Dang it!!! It was so worth it...
Jacobus Frederick Van Starden De Klerk
@yass123 in the description box
Paul Bowman
Paul Bowman 4 aylar önce
I was happy to see you ordered 5 wheels and tires enabling you to have a spare. We all saw what you did to that Rivian tire. :D Awesome build project and way different than watching you mouse-proof a cabin. Cheers man!!
Statewide tfd
Statewide tfd 3 aylar önce
I love watching your electric hummer build I look forward to every video when it comes out and I'm looking forward to the next one. It makes me want to go out and try something new and go out of my comfort zone.
FW911 3 aylar önce
Shipping wheels/tires to yourself is exactly what I did with my Ford Focus. I'm doing it this way from now on. Far simpler to have them ready to install than work through a shop that _might_ be able to get you what you need, because they all have their own suppliers.
qopoy dnon
qopoy dnon 3 aylar önce
Finally a new episode! I love this series and keep checking your channel for the new episode, can't wait to see the Zack actually driving it on the road!
TrailBuilt Off-Road
TrailBuilt Off-Road 4 aylar önce
We are super stoked to be a part of this awesome build! Thanks so much Zack for letting us get you rolling with new wheels & tires! 😎🤙
weedfreer 4 aylar önce
they look mega too! 👍🤘🤙
Max P.
Max P. 4 aylar önce
@Junior Ceno I'm pretty sure that's just a Tesla reference for the memes 😁
Nathan 4 aylar önce
The thumbnail wheels though 🤣
Ks Patel
Ks Patel 4 aylar önce
@Junior Ceno 😂😂
Ria A-C
Ria A-C 4 aylar önce
Not a car enthusiast but it's refreshing to see non-gadget videos. I also find it respectable when someone builds anything from scratch or almost from scratch. Refurbishing or upgrading old things to be modern. Good project and interesting to learn a new thing or two about cars in general.
Rick Walling
Rick Walling 29 gün önce
The wheels you’ve installed on the Hummer fits it Heritage! Fantastic choice and loving the videos
mjpete27 4 aylar önce
Looking goooooood! I like your choice for wheels and tires I think it depends on what you’re going to do for a paint job. If a different tire would look better? I really think you should think about a clearcoat varnish finish give it that used but finished look that so many resto mod’s are sporting these days. Good luck Zack see you next video!
Don Cely
Don Cely 3 aylar önce
Very cool. I love your choice of tires and am fascinated by your whole rebuild. I had wanted to do the same with my old 1971 Series IIA Land Rover, but c'est la guerre. THanks for sharing your adventure!
Henry Rey
Henry Rey 4 aylar önce
This project is just badass, I've never seen something like this. Beautifully executed, nicely documented and full of interesting facts. I'm totally in love with the series and I can't wait for what is coming!
Sadiq Ibra
Sadiq Ibra 4 aylar önce
@shif6 I know we want him work 24/7 plus 10 hours lol poor guy needs to make time for little guy and his wife and deliver to us.
matt ring
matt ring 4 aylar önce
@JerryRigEverything 65 q
Sadiq Ibra
Sadiq Ibra 4 aylar önce
I agree with this comment!! Jerry is badass over all!! So good job!!
Jaysea67yt 4 aylar önce
@JerryRigEverything can I have the engine
The48th Ronin
The48th Ronin 3 aylar önce
It'd be neat to hook up the old wait light to a sensor/timer that lines up with when the contactors close, just for the little detail.
G - Wolf
G - Wolf 3 aylar önce
It’s very impressive to see how good a shape that Humvee looks now. Btw, doesn’t Utah still allow you to purchase tires with studs to help with grip? Anyways, this is a great video to watch.
Crispy 3 aylar önce
Yeah you can run studded tires if you want but that's not really necessary for his application.
Paul Cottier
Paul Cottier 4 aylar önce
Really excited about the progress and thanks so much for sharing. Looking really great!
Jack9579 O.
Jack9579 O. 3 aylar önce
That old hub oil looked great, the previous owner must have taken good care of this thing.
SuperfastMatt 4 aylar önce
Nice thumbnail! I can send you the Jag's old Tesla wheels if you want to put those on the Hummer :)
TheWonder Sock
TheWonder Sock 4 aylar önce
He did it. He put Tesla rims on the H1 thumbnail. I never thought my dare would go through
Gary Tucker
Gary Tucker 4 aylar önce
@JerryRigEverything Tesla wheels would look good. Disappointed when they didn't go on
Nick P
Nick P 4 aylar önce
@JerryRigEverything I was looking for the thumbnail comment
eroi bior
eroi bior 4 aylar önce
Very cool as usual Zach!! So awesome to see the progress. Getting so close now? Re fluids, what about differential fluid and brake fluid? Those count!
nieooj gotoy
nieooj gotoy 4 aylar önce
Finally a new episode! I love this series and keep checking your channel for the new episode, can't wait to see the Zack actually driving it on the road!
Bharat Kumar Gupta
Bharat Kumar Gupta 4 aylar önce
My favourite series so far, super excited for the next one
bigkofjustice 4 aylar önce
Thanks for mentioning backset, it's really important for H1/HMMWV's as most truck rims will stick out a bit too much, then you risk cracking the hood if you are on full compression on the front end resulting in a cracked hood. That being said I'd go with the Cepek GT Hummer wheels, they were the only aftermarket wheel besides Hutchinson that was approved by AM General and exceeds specs, there's 2-3 styles and they were rated for 4000-4500 lbs per wheel at match the Steel wheels in terms of backset.
nick butler
nick butler 4 aylar önce
Since the tires are rotational mass the effects of reduced weight are way more than just the absolute weight difference, so that 30lb/tire reduction is significant! Also any thoughts on safeguarding the drive select so it doesn't accidentally get slapped down to reverse while you're moving?
Little Jackalo
Little Jackalo 26 gün önce
That cheap radio shack toggle switch looks so poor. I'm sure it's temporary and that it is going to be changed to a screen or a proper drive select module like every other custom car uses.
JellaFella 4 aylar önce
@DarkLinkAD my state is flat checkmate
TooHardToWatch 4 aylar önce
@Aj Tech Talks Out of curiosity I perused a couple Army field manuals for the HMMWV, and never saw that particular part illustrated in any of them. Some forums suggested it was a tiedown location for airdrops, or rail loading. The army manual on Humvee airdrops made no mention of it however. I saw a couple images where the wheels are secured, but they used slings to wrap over the top of the tires. There is a document (fm21-305, pg.146) that shows a bar placed though it, with a rope, for use as an improvised winch, for vehicles without installed winch options.
Hummer VS
Hummer VS 4 aylar önce
@f3333ty because if he needs it, and doesn’t have it with him - same effect as not having one at all.
sargentzi 4 aylar önce
WOW i've been watching it since the 1st episode and its absolutely nuts. Hope to see the Humvee finally drives out of the garage.
Mike Sikorski
Mike Sikorski 3 aylar önce
I bought M+S ❄️(mud and snow) tires for my car in the fall. They are a popular brand but after the first snow fall I had to buy winter tires as the all season M+S were terrible on ice or even a little snow. The tires he has on the hummer should be fine with rugged grip and a heavy vehicle but I doubt the rubber will be soft in cold weather.
kevin overholtzer
kevin overholtzer 3 aylar önce
amazing project i might do the same thing with a 96 ford explorer some day just a little worried about the liability even if your in an accident that is not your fault they can make it seem like your at fault because of the altered vehicle.
Little Jackalo
Little Jackalo 26 gün önce
No. It doesn't work like that. This isn't Europe.
Brani BKA
Brani BKA 4 aylar önce
Hi Jerry Kudos to your built! Has not the brake fluid been forgotten? :) All the best and keep em going!
My Classes
My Classes 4 aylar önce
"Out with the old, in with the new" Man i swear nothing makes me smile more than Zac referring to Chrisfix.
Romano 4 aylar önce
Hey guys!!
Peter Caires
Peter Caires 4 aylar önce
Love your videos, thank you. A lot of Tesla, BEV, owners print 3D inserts to fully steal their rims. I would have gone with a smooth mat black rims that resembled a Lunar rover.
Hachiro 3 aylar önce
Make sure to put that spare in your tire rotation schedule! I don't know if it's possible to get a full-size tire with the lifespan of a donut-spare. (From my understanding, donut spares last about 50% longer than full-size tires, in terms of years. As in, before they deteriorate)
plunder1956 4 aylar önce
I like those tyres. The notion of having them mounted and balanced ready to drive is great.
vbddfy euuyt
vbddfy euuyt 4 aylar önce
I personally would've just put Sunraysias with a -25 offset, but these alloy wheels are lighter and they look nice either way
Christopher Lenahan
Christopher Lenahan 4 aylar önce
JFYI: the RTV should be applied to both the inner area and around the outside of the bolt holes. Not a crazy deal here, but with cast-iron the 3-4thou of gap created by the sealant on the inside of the bolt hole and not on the outside can crack the bolting tabs off when torqued down.
Lecon Lance Widjaja
Lecon Lance Widjaja 4 aylar önce
@JerryRigEverything Do an Honor Magic V Durability Test.
gondorian 4 aylar önce
@Aj Tech Talks they are for self recovery. There is a rod that can go through there and it basically turns the wheel into a winch
Dávid G
Dávid G 4 aylar önce
@Blazer Chris Indeed. Look up National Airlines flight 102. The 747 literally fell out of the sky shortly after take-off from a base in Afghanistan because an MRAP (successor to the Humvee) wasn't adequately secured. The MRAP came loose during ascent and crashed into the rear bulkhead of the plane, wrecking hydraulics and a jackscrew controlling the horizontal stabilizer in the process.
Chris Strandt
Chris Strandt 4 aylar önce
@Aj Tech Talks he says it in the video. Tie downs. Meaning securing the vehicle for transportation. There would be a shackle that lines up with that tube, and a bolt that attached the shackle to the hollow tube.
Blazer Chris
Blazer Chris 4 aylar önce
@Aj Tech Talks Probably for anchor points to strap the vehicle down during transport by sea/air. They are heavy, so they need multiple points of contact to keep them from becoming inadvertent missiles in the cargo bay. Air takeoff and landings are sometimes very steep, and all the sloshing of a ship makes it even more important to have as many strap points as possible.
Anissemaan 3 aylar önce
It's been almost a month since this last video about the HUMM EV you posted. I hope nothing went wrong 🙏🏻 and i hope it's finished soon cz we're so excited about this 🙌🏻
Owais Ahmed
Owais Ahmed 4 aylar önce
Have been following this journey from the very star and always I want to watch more of it , love you work man , will be here till the end✌️😊 and tbh can't wait for it❤️❤️❤️❤️
Ravi Naik
Ravi Naik 4 aylar önce
It is looking really good with those lowkey wheels. Eagerly waiting for the next update.
RJ McC Aylar önce
Appropriate tyre choice, fitment and rims. I approve 👏
Quizzit Nizzpin
Quizzit Nizzpin 4 aylar önce
"Out with the old, in with the new." is a tag line ChrisFix often uses, who also happens to have a Hummer. Future collab coming? :)
Magsos 4 aylar önce
i think it was intentional
Abdelmajid Zahmoul
Abdelmajid Zahmoul 4 aylar önce
HOPEFULLY...... Make this happen guys!!
Bryce Larson
Bryce Larson 4 aylar önce
I was searching the comments for this. Love me some ChrisFix videos.
TJ Eclipse
TJ Eclipse 4 aylar önce
I doubt it...
Alexei 4 aylar önce
Would love to see that one
Antti Järvenpää
Antti Järvenpää 4 aylar önce
Greetings from Finland! This project is so cool! I've enjoyed very much following it! Those wheels and rims look very 👍! Can't wait to see your first drive!
cryptout 4 aylar önce
Great wheels! Having watched Dakar the last few weeks I think these come pretty close. Keep up the good work.
Mitchell Yow
Mitchell Yow 4 aylar önce
Hey Zack, love the wheels and tires, great choice!
Medp7700 4 aylar önce
Hi, I love what u do and I really appreciate all what u give for us informations on things we can not know about except for someone do what u do. With this project u have for the hummer I got a question and it could be a suggestion “can u fit a generator somewhere to feed the batteries so if u r off-road u can always charge ur batteries without u worrying about them ?!
Un1uM 4 aylar önce
I think this has to be said: Thank you Zack for including us people not fluent in Freedom Units. Awesome as usual. Gratz
TiG GeTi
TiG GeTi 4 aylar önce
Curious what the stock wheels with nonrunflat tires would weight. I like the choice you went with.
Edward Sadler
Edward Sadler 4 aylar önce
The hummer with the original tires may have look great, but keep in mind these tires have seen years of service in extreme heat and thousands of hours running on sand, combine that with the sun's UV rays equals a dangerous set of tires.
Bone Shaker
Bone Shaker 4 aylar önce
Just stopped by to check on your awesome build. Personally, I would have used amsoil Lubricants for all those needs... otherwise it looks like you've got a great build going on.
MrRadicalMoves 4 aylar önce
Just as a "down the road" upgrade thought... since your Humvee is now going to be electric (and nice and quiet) you will be able to hear lots of noise that wouldn't normally come through with the loud engine. The Hummer H1 Portal Hubs use helical gears to cut down on some of that noise rather than the straight cut gears that the Humvees used. Naturally you will get more strength from the straight cut gears, but if it ends up being too loud, this might be an upgrade you may want to consider.
AtariKafa 4 aylar önce
the man gives us kg so we understand 😊 thanks
24ecko 4 aylar önce
@cas we use both. I don't understand why people get their panties wrinkled over units of measure. A simple Google search solves it.
Ben C
Ben C 4 aylar önce
@AxxL no one cares
LordManhattan 4 aylar önce
@cas It's not "europe based", it's "rest of the world based".
Brendan McMahon
Brendan McMahon 4 aylar önce
It's really starting to come together! Big argument here in Australia is whether EV's are feasible as we have wide expanses to cover, particularly with 4WD's and Trucks. A lack of charging ports is problematic.
RZZ 1701
RZZ 1701 4 aylar önce
Mad Max haven't to fight for the last truckload of gasoline. There is enough space in the Outback for photovoltaik solar power plants. The sun doesn't send you any bills at all.
Coleman Springer
Coleman Springer 4 aylar önce
First ever video I’ve watched by you. I love how you obviously were just tired of waiting for your cybertruck like most people so you made your own.
Cobalt 3 aylar önce
You might want to add reinforcements to the front. Without the engine there to absorb collusion force, a head on collision could be more dangerous.
Gee Jay
Gee Jay 4 aylar önce
Awesome build!!! Also, that wheel/tire package fits the vehicle perfectly.
Thanks for watching And commenting Send a direct message right away 🆙 You have just won a gift 🎁🎁🎁🎁
Douglas Forrester
Douglas Forrester 4 aylar önce
It is starting to feel like this is everyone’s truck. We are are looking forward to going for a drive!
Nelson Glass
Nelson Glass 4 aylar önce
I am wondering with the new cooling cover for the wheel gears… could the front wheels flick a rock at the glass sight window of the cooling cover on the back wheel?
Andy Blackman
Andy Blackman 4 aylar önce
Everytime I watch one of these I wonder how much time and effort goes into behind the scenes talking to people, companies and finding out what is needed to get to the next step. I am enjoying this series.
Bird Lady
Bird Lady 4 aylar önce
Great looking tires! Cool to hear the weight differences too. Thank you for teaching us as you are learning. Be Safe n healthy.
DasErdbeerkuchen 4 aylar önce
Smart move to have lighter wheels. Unsprung load is a killer for consumption! Maybe do a video about that?
steve smith
steve smith 4 aylar önce
I think you missed Wiper fluid and indicator fluid. nice to see it coming on so well. Wheels look amazing, you made a great choice.
Jim schlegel
Jim schlegel 4 aylar önce
Outstanding vid! Very informative, looking forward to seeing the completed project
Glynn Davies
Glynn Davies 4 aylar önce
can't wait to get those batteries in place and go for a spin !!
bocoy noiu
bocoy noiu 4 aylar önce
episode ends with a Cliff hanger and I can wait to see the next. I watch as soon as I can after you publish. This is the most interesting show on any platform.
Adrian Nel
Adrian Nel 4 aylar önce
Saving mass on tyres has the added benefit of reducing rotational inertia. Once a big, heavy tyre is spinning, most of the mass, which is, by the very nature of tyre design, toward the outside of its circumference is now 'encouraging' the tyre to keep spinning, perhaps even despite what the driver is doing with the brake pedal.
Jayden Díaz
Jayden Díaz 3 aylar önce
I’m waiting to see how this project will turn out as well as the color of the vehicle a Matt grey or metallic grey would look so badasss
buffalo wt
buffalo wt 3 aylar önce
If he changes the color i hope he goes for a matte yellow. Though that is very uncommon so i don’t think it will happen!
DF14NT 4 aylar önce
Lookin good! Great choice of tyres and rims. Glad you didn't go chrome!
Harvey Weizman
Harvey Weizman 4 aylar önce
Some food for thought… buy a humvee front end axel/steering assembly, modify it for the rear of the humvee and install a motor to engage/control rear wheel steering/crab mode .. attach a hall sensor to the front steering assembly (this lets the motor know how much to turn the rear wheels and in what direction) with a 3 way switch. Switch configuration. 1 = tight steering radius 2 = straight 3 = crab mode..
Thomas Peterson
Thomas Peterson 4 aylar önce
Great work man! It’s coming along nicely! Can’t wait to see you zipping around in this bad ass humvee.
Austraya 4 aylar önce
Thought I’d put my 2cents in on the oil plug. The magnet is not designed to hold the metal filings in place so it doesn’t “rattle” around in the gear box, it’s designed to stop the metal filings from going in between the teeth of the cogs thus prevents rapid wear
LES 4 aylar önce
Correct. But I have a feeling he knew that.
David Bulauski
David Bulauski 4 aylar önce
I love your videos I'm a tech junky myself, I'm building an Electric Fat bike powered by Tesla cells. I'm really looking forward to seeing this project of yours finished. Have you decided on painting it any other color ? I think I'm going with matte black !
ConnorW07 EXTRAS
ConnorW07 EXTRAS 4 aylar önce
This is an example of what companies should do with cars we know in love instead of making an entirely new design.
Chunkuswumpus 4 aylar önce
i like the rims for your application. if you were staying on road more I'd do tesla style rims because they do increase the aerodynamic efficiency a bit. for anyone looking at their rims and wanting some poke you should check local laws because some states or counties its illegal for anything past the rims being flush with the body
Peso Bands
Peso Bands 4 aylar önce
12:40 dude this build is so clean
DoubleA923 4 aylar önce
Fuck yeah I love watching this series while Im on a treadmill lol 😎 "Out with the old, in with the new " 👈 This got me cheesin 😆 can't wait for a Collab!!! 💯
ankit vaish
ankit vaish 4 aylar önce
Sweet Tyres..! Real amazed the way you v come through with the electric Humveee.. cheers Would love to see a matt electric black paint on the entire body..bt thats my choice.. Eagerly waiting to see your choice..👍
Luke Bowen
Luke Bowen 4 aylar önce
I think the flat black matt was the way to go with those wheels and the tires look great. I love watching your build on this as it takes me back to my time in the Army and pushing those things to the limits. Keep up the good work.
esmann Aylar önce
I like those airless wheels. There is a thin layer of rubber and the rim had a built-in suspension system.
Gianni Basile
Gianni Basile Aylar önce
I had no idea till the other day that zack did videos that weren’t phone related!! These videos, plus the garden / cambry videos are so good! I would love to see his channel completely transition to content like this! ❤️🤟🏻
Ryu St
Ryu St 4 aylar önce
Hell yeah!! Keep the videos coming, Zack. Now that Tesla has delayed their truck I think you’ll be finishing before them!
Austin D
Austin D 4 aylar önce
Coolant(excited for that video), transfer case, portal hubs, torque box, differentials, power steering, brakes, and _maybe_ windshield washer fluid. I count 7 or 8 liquids. Granted, some are duplicates, but there are plenty of liquids in there.
esqueue Aylar önce
I forgot about power steering and washer fluid.
Jacy de Kock
Jacy de Kock 2 aylar önce
You also forgot the oil in the shock absorbers, those have a special liquid as well
Dan Lux
Dan Lux 4 aylar önce
And tire fluid.
Kristian Staalby
Kristian Staalby 4 aylar önce
You forgot blinker fluid
tom shuo
tom shuo 4 aylar önce
Would be a good idea to add a breather pipe and filter up high for the torquebox to prevent it taking in water when you are driving through deep puddles.
Turboflash 4 aylar önce
Considering how much has a regular hummer guzzles, I wonder how long a charge lasts on this
Ghita A.
Ghita A. 3 aylar önce
Just thinking... you could design some AL wheel caps that can open up and turn the wheels into rotors. You could then charge the 🔋 or use the vehicle as a micro water power plant just by parking it in a small river slightly raised up so the wheels(rotors) can spin.
Rajesh Pandharpurkar
Rajesh Pandharpurkar 3 aylar önce
I am just as excited to see your E-HumVee roll off the garage as I did seeing the Tesla Cybertruck! Been following your project since the first episode. Good on you pal! You made good progress. But have the Humvee guys built their electric humvee yet?? I am rooting for you to be the first! Go Jerry!
Kenny Andersson
Kenny Andersson 4 aylar önce
Great as always! I guess water and windshield washer fluid are 2 more liquids inside the vehicle. Not strictly necessary but not far from.
Gary Starnes
Gary Starnes 4 aylar önce
Those wheels look awesome Zack!
J. Caleb Paul
J. Caleb Paul 3 aylar önce
Having a kid changes up things a bit, doesn’t it? I hope the wife n kid are well. When you get to it, I’m looking forward to the next installment of the hummer project.
Rafterman 3 aylar önce
Cool ! I would have tried to have the wheels painted the same color as the tuck. Either way it's all good
Rex R D’souza
Rex R D’souza 28 gün önce
U Could add air suspension to the Humve and lower it to the ground so that High Speed it will have low centre of gravity I guess 😁👍🏻
I Bought My DREAM CAR and it's AMAZING!!!
görünümler 1 597 320
Olsaydı Verecekti Zaten
görünümler 242 599
Colorful wooden toys Oddly satisfying
Şampiyonlar Ligi 👑
görünümler 60 660
Pull off my #Shorts 278
görünümler 6 165 311